Detailed description

I. Product Overview:
Collagen is a biological polymer substance, a white, opaque, unbranched fibrous protein. 
Fish (fish scales, fish skin) collagen, porcine collagen, bovine collagen, chicken-derived collagen, collagen (collagen is mainly type I collagen, and studies have found that hydrolyzed type I collagen to collagen II collagen Cell growth has a specific promotion effect, which can increase the cell growth rate by 2.5 times, and the mechanism may be caused by the feedback mechanism of cartilage tissue. Other proteins such as wheat protein and macromolecular collagen have no such effect. Hydrolysis type I and II Collagen has a significant effect on chondrocytes, and there is no significant difference between the two).

Second, the equipment overview:
This unit is a device that can complete drying and granulation at the same time. According to the process requirements, the pressure, flow rate and orifice size of the liquid pump can be adjusted. The desired spherical particles of a certain size are obtained.
The working process of the unit is as follows: the feed liquid passes through the high pressure input of the diaphragm pump, and sprays the mist droplets, and then flows down with the hot air. Most of the powder particles are collected by the bottom discharge port, and the exhaust gas and its fine powder are passed through the cyclone separator. Separation, the exhaust gas is discharged by the exhaust fan, the powder is collected by the powder collecting cylinder located under the cyclone separator, and the secondary dust removing device can also be equipped at the fan outlet, and the recovery rate is 96%-98%. 
The materials of the tower body, the pipeline and the separator which are in contact with the material are made of SUS304. There is an insulation layer between the inside of the tower body and the outer casing, and the filling material is rock wool. The tower body is provided with an observation door, a sight glass, a light source and a control instrument, and is controlled and displayed by an electric control console. 
The unit's heat source uses steam heaters, electric heaters or other types, which have the advantages of convenient operation, fast start-up, compact mechanism and clean and clean hot air. In addition, a control device for the heat source is installed in the electric control cabinet to make the temperature of the inlet infinitely adjusted. The factory can provide different heating methods according to the actual needs of users. 

Third, the equipment features:
※ The drying speed is fast, the surface area of the liquid is greatly increased after atomization. In the hot air flow, 95-98% of the water can be evaporated in an instant, and the drying time takes only ten to several tens of seconds. It is especially suitable for the drying of heat sensitive materials. 
※ The obtained product is spherical particles with uniform particle size, good fluidity, good solubility, high purity and good quality. 
※ Wide range of use, according to the characteristics of the material, can be used for hot air drying, or cold air granulation, adaptability to materials. 
※ The operation is simple and stable, the control is convenient, and it is easy to realize automatic operation.